Schneider Proface HIM PFXGP4501TAD Pro-face GP4000 10,4 Basic
Pro-face PFXGP4501TAD, GP4000, HMI-Touchscreen
The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
Even though the GP unit's level of resistance is equivalent to these standards, oils that should have no effect on the GP can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the GP's front face protection sheet becomes peeled off, these conditions can lead to the
ingress of oil into the GP and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the GP unit, be sure to confirm the type of conditions that will be present in the GP's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket.
Email: anna@cwlyautomation.com
Tel: +86 136 67121125 whatsapp/ VK/ Telegram also available
Company: CW Green Tech
http://www.cwlyautomation.com
GP4000 series has high connectivity with a wide range of industrial controllers and provides a variety of lineup in sizes, front colors, coating, and open frame. Pro-face Standard HMI, GP4000 Series flexibly satisfies customers' needs.
Product Features
Compatible Video Unit:
- VM Unit (GP3000-VM01) - Video Input: 4ch, DVI-I input: 1ch, DVI-I output: 1ch
- RGB Input Unit (GP3000-RGB201) - Analog RGB input: 2ch
Compatible with Pro-face Remote HMI
* Not with video image display.
Compatible with EZ Series
Compatible software: GP-Pro EX Ver. 4.07.300 or later
For details of replacing GP3000, refer to the replacement guid
Email: anna@cwlyautomation.com
Tel: +86 136 67121125 whatsapp/ VK/ Telegram also available
Company: CW Green Tech
http://www.cwlyautomation.com
Standard product information
Family HMI
Series GP4000 Series
Size 10"
Model PFXGP4501TAD
Global Code PFXGP4501TAD
Product Features 10" DC Analog
Display specifications
Display type TFT Color LCD
Display size 10.4"
Resolution 640 x 480 pixels (VGA)
Effective display area W211.2 x H158.4 mm [W8.31 x H6.24 in.]
Display colors 65,536 colors (No blink) / 16,384 colors (Blink)
Backlight White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life 50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control 16 Levels (Adjusted with touch panel or software)
Touch panel type Resistive Film (analog)
Touch panel resolution 1,024 x 1,024
When using GP-Pro EX:
- Media: FLASH EPROM
- Screen Area: 32MB *Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.
- User Font Area: 8MB
- Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
- Free Space: None
The HMI GP4000 is a standard touch panel for operating simple machines. This product range has been optimized to meet the requirements of the operator interface of simple machines. The focus here is on connectivity, cyber security for remote access with Pro-face Connect and user-friendly visualization. The resistive single-touch display in 10.4 inch screen with 65k colors and a resolution of 640x480 pixels is used for visualization, operation and status display of your applications. The user interface on the HMI is configured with the GP-Pro EX software. The wide range of interfaces (1 x Ethernet (dual IP), 2 x serial COM, 1 x USB (Type A), 1 x USB (mini B) and an SD card slot ensure optimal connectivity. The external dimensions of the display are 272.5 mm (width) x 214.5 mm (height) x 57 mm (depth) with a panel cut-out of 259 mm x 201 mm and a panel thickness of 1.6 to 5 mm. The product complies with protection class IP65F, Type 4X (for indoor use only), Type 13 (when properly installed in a housing). It also complies with standards such as CE, ClassNK Approved, EAC, ABS, RINA, UL/cUL Listed.
Other models:
GP-4201TM Model PFXGM4201TAD HMI
GP-4201TM Modular Type Graphic Operator Interfaces GP4000 Series
3.5 inch Isolated Model Touchscreen TFT Color LCD
Feature
TFT Color LCD (65,536 colors)
Display Resolution : QVGA
USB Type A/ mini B
USB RS-232C/422/485
USB Type A (Host)
Type mini B (Device)
Ethernet
Input Voltage DC24V
Schneider Proface PFXGP4114T2D
Schneider Proface PFXGP4301TADW
Schneider Proface PFXGP4501TADW
Schneider Proface GP-4201T Schneider Proface GP-4201TW Schneider Proface GP-4301T
Schneider Proface GP-4301TW Schneider Proface GP-4303T Schneider Proface GP-4401T
Schneider Proface GP-4401WW Schneider Proface GP-4501T Schneider Proface GP-4501TW
Schneider Proface GP-4503T Schneider Proface GP-4601T Schneider Proface GP-4603T