The material enters the hopper from the feeding port and is lifted to the top with the conveyor chain, bypasses the top wheel and then turns down, and pours the material into the receiving tank.
The hopper scoops up the material from the storage below, lifts it to the top with the conveyor belt or chain, and turns down after bypassing the top wheel. The bucket elevator dumps the material into the receiving trough. The transmission belt is generally made of rubber belt, which is installed on the lower or upper transmission drum and the upper and lower reversing drums. The chain-driven bucket elevator is generally equipped with two parallel transmission chains, and there is a pair of transmission sprockets on the upper or lower side. Above is a pair of redirecting sprockets. Bucket elevators are generally equipped with casings to prevent dust from flying in the bucket elevator.
It is suitable for lifting from a low place to a high place. After the supplied material is put into the hopper through the vibrating table, the machine will automatically run continuously and transport it upwards.
https://www.dahanmachine.com/product-center/Z-Type-Bucket-Elevator.html