Уважаемые коллеги, доброго времени суток! Мы начинаем обзор научных изданий в области Строительство зданий и сооружений. Сегодня хотим представить вашему вниманию британское научное издание Cement and Concrete Research. Журнал имеет первый квартиль, издается в Elsevier Ltd., его SJR за 2020 г. равен 4,628, импакт-фактор - 10,933, электронный ISSN - 0008-8846, предметные области - Строительство зданий и сооружений, Материаловедение. Вот так выглядит обложка:
Редактором является Роберт Флатт, контактные данные - flattr@ethz.ch.
Целью журнала Cement and Concrete Research является публикация лучших исследований в области материаловедения и инженерии цемента, цементных композитов, строительных растворов, бетона и других родственных материалов, содержащих цемент или другие минеральные вяжущие вещества. При этом в журнале основное внимание будет уделено сообщениям об основных результатах исследований свойств и характеристик вяжущих материалов, новые экспериментальные методы, новейшие методы анализа и моделирования, обследование и диагностика реальных цементных и бетонных конструкций и потенциал для улучшения материалов.
Адрес издания - https://www.journals.elsevier.com/cement-and-concrete-research
Пример статьи, название - A roadmap for quality control of hardening and hardened printed concrete. Заголовок (Abstract) - This article focuses on the specifics in characterizing the properties of additively manufactured, cement-based materials in their hardening and hardened states. Such characterization is required for the material development, structural design, and quality control of both printable material and 3D-printed elements. The related challenges are associated with the printed material's layered structure, which results in higher degrees of anisotropy and inhomogeneity in comparison to conventionally cast concrete. Thus, in the production of test specimens, the particularities of the real-scale 3D-printing process must be considered. Here a distinction is made between the production of samples for material testing prior to or parallel to actual application and those extracted from full-scale elements. Specifics of destructive testing are analyzed with emphasis on mechanical characteristics, while the discussion of non-destructive testing mainly addresses the geometry of the deposited layers and printed elements, measuring deformations, and finding such defects as voids and gaps. Finally, approaches required for developing/adapting guidelines and standards for testing of 3D-printed, cement-based materials are discussed. Keywords: Digital concrete; 3D concrete printing; Quality control; Material testing; Hardened concrete