Thanks to a haircut with a bang it is possible to look younger, and if to pick up an ideal variant in addition to hide the lacks. Many options: straight, oblique, double, torn, etc. No matter what you choose, it needs a haircut more often than the rest of your hair.
You can adjust the length without problems in any hairdresser's shop. Why not take the opportunity to learn for yourself how to trim your bangs? Do not do without sharp scissors and Filipovic any, a basic set of combs, to it you can add a hairdryer and a round comb for laying (brushing)
How do you make a slanting bangs on your side?
Slanting bangs are characterized by a diagonal hair cut, which can be short, medium or long. Average length is suitable for those who have a square face, and a long oblique should be chosen by the owner of a round face. The owners of triangular faces should experiment with a short version so that the maximum length was up to the eyebrow line.
Make a slanting parting. The control point is the place of the highest eyebrow lift, and the opening should be on the side where the cup is the smallest in length. Then separate the thinnest comb from the rest of the hair with a comb. To prevent curls from interfering, they can be stabbed with hair clips. Then, to trim the oblique bangs, you need to follow the algorithm:
1. Slightly moisturize and straighten your hair with a comb;
2. Leaving a reserve of about 1 cm, shorten it to the desired length;
3. Gripping alternately the strands with two fingers, make a straight cut of the tidy edging;
4. If you want to thin out the ends of your hair with the help of filament scissors.
It is necessary to consider that after the packing of bangs becomes shorter, therefore choosing desirable length, at once do a small stock at once.
Cutting a torn bangs
The cheekbone with torn edges belongs to the universal, fits almost any type of face. It is often used in cascading haircuts where more hair needs to be added and is also suitable for those who wear a haircut or bean.
There are two ways to make a torn bangs: Cut dry on a blade or wet hair with a straight barber's scissor. Hair ends do not need to be filtered
Haircuts for dry hair
1. Trimming a torn bangs with a blade is very simple: twist the individual small strands into dense strands and shorten each to a certain length with a sharp blade. If the individual sections of the torn tips need to be corrected after the first time, repeat the same procedure with them. In this way, you can make a straight and even-edged cut, but be sure to wash and dry your hair before cutting.
The torn bangs are straight and oblique
2. On wet hair make a torn cup of tea is also not very difficult. After dividing the hair, straighten it with a comb. Next, you need to clasp a strand of up to 1 cm thick with two fingers and pull it perpendicular to the head to make a slanting cut. So it is necessary to walk by scissors in turn on all lengths then to dry and to put the hairdryer.
Chek straight cut
The easiest thing to do is to trim your bangs, which coincide with the eyebrow line. This is called a straight line, it is recommended to make it so long that it barely covers the eyebrows. To get a straight and tidy cut, the hair should first be washed and dried so that it can be cut wet, and then the curls should be evenly separated from the bangs by a horizontal stripe along the entire width of the forehead, so that they do not interfere, combed back or stabbed. The density depends on where the line of sampling is to be carried out.
The following steps should be taken:
1. From the middle, separate the strand, then pull it at an angle of 45° and cut it off. This will be the base length.
2. The rest of the hair should be trim in the same way.
The next step is to cut each strand evenly so that the cutting line is even and tidy. To do this, you need to make one control strand, and the rest of the strands should be leveled according to this length.
4. In the end, brush up the entire length of the strand with even edges.
5. If you see any irregularities, you should use scissors again.
6. The tips can be treated with a filtration shear.
Cutting the bangs with triangular sampling
To get a triangular parting, you need to first make a flat one. To do this, use the sharp end of the comb to draw a line from the middle of the forehead to the top of the head. Distribute the hair to the sides. Next, place the tip of the comb in the top of the imaginary triangle, it is in line with the nose bridge about a few centimeters above the hair growth line.
The higher the top, the thicker the bangs will be. Draw the tip of the comb on both sides, as if drawing a line from the forehead to the temple. Separate the other curls at once and stab them so that they do not interfere.
Separate the hair and stab it
After the triangles have been sorted out, stretch a small strand of hair horizontally and shorten it with scissors. Gradually treat the entire area, and at the end correct the drawbacks. For volume, the tips can be thinned with special scissors.
Checks on two sides
It's, uh... it's, uh...
The easiest two-sided cutting option
Make an even parting in the middle and brush your hair. Now place the tip of the comb approximately in the middle of the sample, where it will be the beginning. Now it's time to do one and the other half, so separate the hair on the sides with samples from the beginning of the bangs to the ears. There should be two parts that need to be symmetrically shortened to the desired length. Shorten first one half
In the end you need to walk along the ends of your hair with scissors, to do this, hold a separate buckle between your fingers and turn to get a brush. Now, use the tips of the scissors to cut the tips with small zigzags. The bangs are cut in this way to look more natural.
Semicircular bangs
Choose a bangs arc if you want to visually change the oval face, for example, the owners of the square shape of the face can visually extend the face. To make a semicircular and with elongated strands on the sides, you need to prepare a tool: scissors, thin comb, hairpins, sprayer with water.
How to make step-by-step semicircular bangs:
1. The first thing you need to do is to trim the bangs evenly so that they are as long as the longest ends of the semicircular bangs should be.
2. Dampen the atomizer and pull out the comb.
3. Divide the strands into two parts, use scissors to gently cut the ends to a semi-circular shape.
4. In the end, it is possible to thin out with special scissors.
The finer points of a two-level bangs clipping
The cutting technique is to form a cup with different hair lengths. This can be achieved by cutting it in layers: the first one reaches the middle of the forehead, the second one is just above the eyebrow line, the last one covers the eyebrows a little bit.
To easily trim like this, you must first separate the lower layer, and the rest of the mass is stabbed upstairs. Now you can easily level the edges, and then proceed to the formation of a longer layer, and then - until the end. Filter at will.
Asymmetrical bangs
Choose a bangs arc if you want to visually change the oval face, for example, the owners of the square shape of the face can visually extend the face. To make a semicircular and with elongated strands on the sides, you need to prepare a tool: scissors, thin comb, hairpins, sprayer with water
How to make step-by-step semicircular bangs:
1. First, you need to trim a straight chubby to the tip of your nose;
2. Divide the hair into three parts, with the largest in the middle;
3. Cut the central strand with a slanting cut so that the shortest side reaches the eyebrows and the longest one is slightly shorter than the side strand.
Now you know how beautiful it is to trim your bangs at home, which will give your hair more charm. Know that you won't be able to get your hair cut right away. Don't be afraid to make mistakes on the way to the world of beautiful hairstyles and a perfect look!