Уважаемые коллеги, доброго времени суток! Представляем вам австрийское научное издание International Journal of Simulation Modelling. Журнал имеет второй квартиль, издаётся в Vienna University of Technology, его SJR за 2021 г. равен 0,713, электронный ISSN - 1726-4529, предметные области - Моделирование и имитация, Прикладная наука о компьютерах. Вот так выглядит обложка:
Редактором является Борут Бухмайстер, контактные данные - borut.buchmeister@um.si.
Журнал предоставляет глобальный форум для публикации всех форм исследовательской работы по имитационному моделированию в академических институтах, промышленности или консалтинге. Редакторы IJSIMM ищут, в первую очередь, оригинальные, высококачественные, по-настоящему проницательные, теоретические и прикладные исследовательские работы, посвященные имитационному моделированию, главным образом в области моделирования дискретных событий в производственной инженерии или промышленном инжиниринге.
Адрес издания - http://www.ijsimm.com/
Пример статьи, название - DESIGN AND SIMULATION OF THE CONTROLLED FAILURE OF CUSTOM-BUILT RIGID SHAFT COUPLING. Заголовок (Abstract) - In this paper, the use of conventional analytical calculating methods for designing the mechanical part with predicted endurance time is investigated. In a case study a design and dimensioning of custom-built shaft coupling with torque limiting function was conducted. Necessary analytical calculations were carried out to determine the possible weak points of the current shaft coupling design. Numerical analyses of the newly designed shaft coupling were performed using predefined material properties and boundary conditions. Using Goodman criteria, the most suitable design was selected. Prototypes of shaft couplings with different designs based on the numerical analysis were tested to validate the numerical results. Analytical approach as well as numerical analysis were compared. The validation of the produced machine part is also performed. Results of the research work showed that conventional analytical methods can be applied to design and dimension a mechanical part with predicted failure following steps (methodology) described in the paper. Key Words: Shaft Coupling, Design, Dimensioning, Fatigue, Simulation, Custom Design